com.altnautica.capture. It records
capture sessions on a drone or a Visor: every camera, the IMU, GNSS and the
LiDAR, posed by Navigation or by the flight
controller. It selects pose-tagged keyframes, uploads finished sessions to a
reconstruction node on the same network (resumable, checksum-verified), and
streams keyframes live to that node while you fly. A ground station relays the
radio lane onto its LAN when no shared network reaches the drone.
The node that turns sessions into a splat, a point cloud, a mesh and indoor
products runs the Reconstruct
extension. Capture without Reconstruct still records sessions; they wait on
the drone until a node is paired.
Install
ados plugin install also accepts a release URL or a downloaded archive. The
install prompt lists every permission the extension asks for; you can also
install it from the node’s Extensions page in Mission Control (see
Install extensions from Mission Control).
The archive is small. The per-architecture binaries are install-time payloads:
the agent downloads only the files for its own architecture and profile from
the GitHub release, checks each against the sha256 and size pinned in the
signed manifest, and refuses the install on any mismatch.
Pair with a reconstruction node
Pair the drone and the node to the same Mission Control, with Reconstruct installed on the node. Mission Control issues the drone a credential from the node scoped to Capture’s lanes (session upload and keyframe ingest) and installs it on the drone. The drone finds the node over mDNS, or you pin it withcapture.compute_node_addr.
Keyframes ride the LAN first, then the radio link’s auxiliary stream through a
ground station in the relay role (pose and status only), then the cloud
relay.
Configuration
Read and write the configuration from Mission Control’s Capture setup page, or over REST through the extension’s own route:
When sessions upload follows Navigation’s map placement
(
navigation.map_placement): after landing for post_flight and hybrid,
streamed during the flight for stream.
The extension’s HTTP API
Under/api/plugins/com.altnautica.capture/x/ on :8080, with the normal
pairing key (the same paths work through a ground station’s relay proxy):
Mission Control
Permissions
Permissionsbutton.subscribecamera.control.writecapture.storage.writecloud.publishdisplay.oled.pageevent.publishevent.subscribemavlink.readmcp.exposenetwork.outboundnode.info.readplugin.http.com.altnautica.reconstructplugin.navigation.map.readradio.aux_streamsensor.stream.readsensors.rig.writetelemetry.extendtelemetry.readtelemetry.subscribe.statusui.slot.cockpit-panelui.slot.map-overlayui.slot.node-agent-pageui.slot.node-surfacevideo.whep.relayvision.frame.read
*
Next steps
Reconstruct
The reconstruction node and perception offload.
Navigation
The pose and live map Capture uses.